High-voltage stackable energy storage battery
HVM15-120S100BL High Voltage Stackable LiFePO4 Battery
The HVM15-120S100BL high voltage battery series uses stackable 100Ah LiFePO4 modules to cover 48V to 384V and 4.8kWh to 38.4kWh project configurations.
Product model: HVM15-120S100BL
Product overview
Stackable high-voltage battery family for higher-power projects
HVM15-120S100BL is a configurable battery series for qualified villas, workshops, commercial backup and off-grid projects. Each project must be designed around the selected module count, high-voltage inverter, protection scheme and installation conditions. Explore the complete CVC Energy energy storage battery range for related capacity and installation options.
- 15S to 120S stackable configurations
- 48V to 384V rated-voltage range
- 4.8kWh to 38.4kWh nominal-energy range
- RS485 and CAN communication
- Touch display and movable base configuration
- Download technical documents for distributor review and project quotation
Product Core Advantages
Two practical reasons HVM15-120S100BL can support distributor, installer and project-buyer evaluation when the final system configuration is confirmed.
Configure voltage and energy for higher-demand storage projects
The modular series spans one to eight battery modules, allowing project teams to review an appropriate voltage and energy level instead of forcing one fixed pack size.
Integrated BMS, touch display and modular access
RS485 and CAN communication, a touch display and a modular stack support commissioning and service reviews. High-voltage inverter matching and protection remain project-specific.
Application scenarios
Application and channel-fit scenarios
Use the correct inverter, BMS communication and installation conditions for each project. For regional demand planning, review CVC Energy’s Southeast Asia battery and inverter solutions.
Villas
Evaluate multi-module storage for larger residential loads and compatible high-voltage inverters.
Workshops
Support qualified workshop backup projects after load and protection studies.
Commercial backup
Use a selected module configuration for higher-power backup requirements.
Inverter matching
Confirm rated voltage, current, BMS protocol and protection before quotation.
Technical specifications
Technical specifications
Public product data based on supplied factory material. Final configuration should be confirmed for the destination market.
| Product model | HVM15-120S100BL |
|---|---|
| Battery type | LiFePO4 |
| Model range | HVM15S100BL to HVM120S100BL |
| Rated voltage | 48V to 384V |
| Rated capacity | 100Ah |
| Total energy | 4.8kWh to 38.4kWh |
| Configuration | 15S / 1 module to 120S / 8 modules |
| Maximum charge/discharge current | 100A |
| Cycle life | >= 4000 cycles at 80% DOD, 25 C |
| Communication | RS485 / CAN |
| Display | Touch display |
| Dimensions | 570 x 380 x 232mm to 570 x 380 x 1415mm |
| Net weight | 68.4kg to 358.9kg |
| Charge temperature | 0 to 60 C |
| Discharge temperature | -10 to 65 C |
| Ingress protection | IP21 |
Standard models support prompt initial supply. Volume orders are produced against confirmed specifications, with a typical lead time of 15-45 days depending on model, quantity, customization, documentation requirements and destination. Final configuration, MOQ, delivery and warranty terms are confirmed in the quotation.
Configuring a high-voltage battery stack?
Send the inverter model, required voltage, load, capacity and site conditions. CVC Energy will review the suitable HVM15-120S100BL module configuration.